Windshield Replacement | Davis Auto Glass INC
Comprehensive Windshield Replacement Services in Eugene, OR
Windshield replacement is one of the most critical services we offer at Davis Auto Glass INC. Beyond restoring clear sightlines, a properly installed windshield is a key safety component that supports occupant protection systems and vehicle structure. Located at 125 Cap Court, Eugene, Oregon 97402, our team brings 25 years of experience to ensure every windshield replacement meets safety and performance expectations.
Professional Windshield Replacement
A windshield is engineered for a specific vehicle make and model — curvature, sensor mounts, and glass composition all affect performance. When replacement is needed due to cracks, extensive chips, or structural compromise, it’s essential to use the correct glass, adhesive, and techniques. Improper installation can leave vehicles vulnerable to leaks, wind noise, or failure to protect occupants in a crash.
Why Windshield Replacement Matters
- Structural Integrity: The windshield helps support roof strength and anchors passenger-side airbags during deployment.
- Safety Performance: Cracks that impair visibility or extend into the windshield’s bonding area reduce safety in collisions.
- ADAS Compatibility: Many modern windshields integrate mounting locations for cameras and sensors. Replacement often requires ADAS recalibration to ensure lane-keeping, automatic braking, and other systems function properly.
- Long-Term Durability: Proper adhesives and correct cure process prevent future failures such as leaks, stress fractures, or detachment.
Signs You Need Replacement
Chips or cracks larger than a quarter or that extend into the edge of the windshield
Multiple cracks or branching stress fractures
Damage in the driver’s or camera’s line of sight that can’t be safely repaired
Pitting or significant surface wear affecting visibility
Water or air leaks indicating failed seals or adhesion
Our Windshield Replacement Process
1. Detailed Inspection
We begin with a thorough inspection to assess damage, locate sensor and camera mounts, and determine whether a repair or replacement is appropriate. This assessment includes an ADAS compatibility check to determine recalibration needs.
2. Glass Selection
We source OEM-equivalent glass or manufacturer-specified replacements matched to your vehicle. Glass is selected to align with curvature, optical clarity, and sensor mount requirements.
3. Old Glass Removal and Surface Preparation
Old glass and adhesive are removed carefully to avoid damage to the vehicle frame or interior components. The pinchweld and mounting surfaces are cleaned and prepared to ensure a proper bond.
4. Adhesive Application and Installation
We use high-performance urethane adhesive systems that meet or exceed OEM specifications. Proper bead size and application technique are critical for structural strength and seal integrity. The new windshield is set into place with precision.
5. Correct Cure Time and Environmental Considerations
Adhesive cure time is essential. We follow manufacturer-recommended cure times and confirm environmental conditions to ensure safe return-to-service times. In many cases we advise waiting periods before driving to allow for full adhesion.
6. ADAS Check and Calibration
If the windshield houses cameras or sensors, we perform ADAS recalibration (static and/or dynamic) to manufacturer specifications. We verify sensor alignment and perform system checks post-calibration.
7. Final Inspection and Customer Handover
A final inspection confirms seal integrity, visibility, and system function. We provide customer instructions for post-service care and any necessary waiting periods.
Fleet and Commercial Windshield Services
We support fleets with efficient scheduling, documentation, and quality control. Our process minimizes downtime while maintaining high safety standards. Fleet managers can coordinate multiple units through our contact channels to streamline service delivery.
Repair vs. Replacement — Our Assessment Criteria
We repair chips and small pits when it’s safe and effective to do so — typically small, shallow damage away from the edges and not within the driver’s line of sight. When damage is large, near the edge, or in a location that compromises sensors or visibility, replacement is recommended. We always prioritize safety and long-term reliability over temporary fixes.
Insurance and Claims Guidance
While we don’t provide carrier-specific details here, our staff is experienced in preparing estimates and documentation that insurers require. We can coordinate directly with insurers when needed and provide the required reporting.
Key Benefits of Our Windshield Replacement Service
Safety-first approach with manufacturer-grade adhesives and installation procedures
ADAS calibration expertise to restore advanced safety systems
Precise fitment using OEM-equivalent glass
Clear communication and documentation for insurance and records
Installation warranty and post-service support
Safety Considerations After Replacement
Avoid car washes and high-pressure water for the first 24–48 hours (depending on recommended cure time)
Avoid sudden temperature changes that could stress the new adhesive
Follow our specific wait time before resuming normal driving, especially on rough roads
Frequently Asked Questions — Windshield Replacement
How long does a windshield replacement take?
The physical installation often takes one to a few hours. However, adhesive curing and ADAS calibration may extend the total time to ensure full safety and functionality.
Will replacing the windshield affect my vehicle paint or trim?
We take care to protect surrounding trim and paint during removal and installation. Our technicians are experienced in careful removal to prevent damage.
Do you use OEM glass?
We can source OEM-equivalent glass or manufacturer-specified glass depending on availability and customer preference. We select glass that matches vehicle specifications for fit and performance.
Can you replace windshields on newer vehicles with ADAS?
Yes — we perform windshield replacements and provide the necessary ADAS calibration to restore camera and sensor function.
Contact and Visit
Visit us at 125 Cap Court, Eugene, OR 97402 for a professional inspection and transparent estimate. Our team will walk you through options, timing, and what to expect post-service.
